|
The gain–bandwidth product (designated as GBWP, GBW, GBP or GB) for an amplifier is the product of the amplifier's bandwidth and the gain at which the bandwidth is measured. For devices such as operational amplifiers that are designed to have a simple one-pole frequency response, the gain–bandwidth product is nearly independent of the gain at which it is measured; in such devices the gain–bandwidth product will also be equal to the unity-gain bandwidth of the amplifier (the bandwidth within which the amplifier gain is at least 1).〔 〕 For an amplifier in which negative feedback reduces the gain to below the open-loop gain, the gain–bandwidth product of the closed-loop amplifier will be approximately equal to that of the open-loop amplifier. According to S. Srinivasan, "The parameter characterizing the frequency dependence of the operational amplifier gain is the finite gain–bandwidth product (GB)."〔Srinivasan, S. "A universal compensation scheme for active filters." International Journal of Electronics 42.2 (Feb. 1977): 141. Science & Technology Collection. EBSCO. Dallas Public Library == Relevance to design == This quantity is commonly specified for operational amplifiers, and allows circuit designers to determine the maximum gain that can be extracted from the device for a given frequency (or bandwidth) and vice versa. When adding LC circuits to the input and output of an amplifier the gain rises and the bandwidth decreases, but the product is generally bounded by the gain–bandwidth product. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Gain–bandwidth product」の詳細全文を読む スポンサード リンク
|